Phison Ps2251 07 Firmware

Before we posted Kingston black film production tools tutorial DT100 G3, because the white pieces MPALL production tools can not mass production, all versions of Phison_MPALL are booming and recently a new version of MPALL V5.03.0A white film, so I tried it and succeeded, the first on the map

We can see the mass production of Toshiba flash memory particles, before that Hynix. DETAILED Production tutorial below:
1. Download MPALL_F1_7F00_DL07_v503_0A
2. Open a folder detecting means Getinfo v3.10.7.6, the master is found PS2251-07, Toshiba particles TLC

3. Open MPALL_F1_7F00_DL07_v503_0A.exe main program folder, click the update to identify USB flash drives on the right side

4. Click the setting, select the advance setting and new last setting of these two options and click OK to go

FIG. 5. Press disposed, USB 3.0 interface type is selected, the master model before selecting getinfo detected PS2251-07, host port where the election 2.0

6. Check the DO ISP, Erase, and then select the firmware production tools directory of the end of the bin, called a burner, to choose BN beginning of the file, to choose another firmware FW beginning of the file

7. After switching to selected third partition setting, if the production is restored, select a partition, mode 3 is selected, to select Removable partition below, if production CDROM, selected from the two partitions, mode 21 is selected, selection click save the ISO image to the right of the path, and then close the return to the main screen

8. Click update to the right click start mass production

Waiting for mass production success will show green, then turn off the new production tools plug U disk just fine. Note that the above tutorial is written firmware, so if the firmware version is not likely to match the brick with your U disk, where it is recommended to uncheck DO ISP try not to consider the write firmware, firmware is ps2251-07 other master do not write the firmware.